72 pgr 603 10 optical receiver module stm-16 lh / oc-48 lr the receiver module is intended for use at sdh and sonet bit rates. the receiver meets all present requirements in the itu- t (g.957) and bellcore (gr-253- core) recommendations. the receiver consists of an ingaas apd, silicon bipolar ic preamplifier, and silicon ics. a high level of integration is employed which results in small size, low power consumption and high reliability. alarm output for loss of signal is provided according to sdh/sonet requirements. key features ? complete long haul module without need for external high voltage bias ? low power dissipation ? wide operating case temperature range: 0 c to 70 c ? small size (59x36x10 mm) 24-pin dip ? dynamic range >25 db (typical) ? operating wavelength 1.3 m m or 1.5 m m ? sdh/sonet compatible for stm-16/ oc-48 data rate ? diffential ac-coupled data and clock outputs fiber preamp noise filter limiter clock recovery loss of signal data decision circuit phase info data clock clock 3.3 2.54 23.11 59 10 36 25.4 pin 1 pin 12 pin 13 pin 24 pin function description 3 los flag loss of signal flag, cmos high level when activated 5 clock inverted clock output 6 clock clock output 10 data data output 11 data inverted data output 18 v ee negative power supply voltage: -5.2 v 22 v cc positve power supply voltage: +5.0 v 4,7-9,12-17,19,20 ground - 1,2,21,23,24 no connect -
73 item pgr 603 10 unit bit rate 2488.32 mbit/s operating wavelength 1280-1335/1500-1580 nm minimum sensitivity -30 (-32 typical) dbm minimum overload -8 (-6 typical) dbm optical path penalty 1.0 db output clock jitter 0.01 ui rms jitter transfer function g. 958 itu-t jitter tolerance g. 958 itu-t supply voltage +5.0 and -5.2 v power consumption 3 w operating case temperature -5 to +70 c note 1. values in brackets guaranteed at beginning-of-life. information given in this data sheet is believed to be accurate and reliable. however no responsibility is assumed for the consequences of its use nor for any infringement of patents or other rights of third parties which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of ericsson components ab. these products are sold only according to ericsson components general conditions of sale, unless otherwise confirmed in writing. specifications subject to change without notice. 1522-pgr 603 10 uen rev. a ? ericsson components ab, january, 1999 optical and electrical specification electrical interface output signals differential a.c. coupled outputs, ecl compatible. loss of signal cmos, active high output, less than 2 dbm of hysteresis. quality assurance ericsson components commitment to quality has been proved through a decade of semiconductor device production and has been confirmed to iso 9001. these products are qualified according to the intention of applicable bellcore standards and ericsson internal quality specifications, and supplied with final test data. connector options fc/pc sc (other connectors available on request) pgr 603 10 ericsson components phone: +46 (8) 757 4402 fax: +46 (8) 757 4621 american sales region phone: +1 (972) 583 7236 fax: +1 (972) 583 5005 european sales region phone: +44 (1793) 488 300 fax: +44 (1793) 488 301
|
